Back to product page

Error list


Below is the list of errors that can be fired by the component.

Value Description
20001 Item not found in Headers collection.
20002 File not found.
20003 File read error.
20005 Could not create file.
20006 Could not write to file.
20007 Unsupported proxy type.
20008 Server response invalid.
20009 Cannot change host information at this time.
20010 Operation invalid in this state.
20011 Could not set Content-Type header. Is it already set to some other value?
20013 SSL handshake was not successful and was shut down. Possible bad implementation of SSL on the server side.
20014 SSL handshake failed: 
20015 Hostname is not set, unable to connect.
30026 Failed to load key or certificate. Password invalid?
30040 Proxy server has closed the connection.
30041 Proxy server rejected supplied login credentials.
30042 Proxy Hostname not set.
30043 Aborted by user.
30044 Unable to decompress data.
30045 Protocols other than HTTP and HTTPS supported only when ProxyType is set to ProxyWEBStandard.
30046 You cannot use IPv6 with proxy support.
30047 You cannot use IPv6 with BindIP.
30048 Too many redirections.
39999 License key missing. You can not use this component in design environment.



Certificate related errors:
Value Description
50000 Certificate ok
50002 Certificate error: Unable to get issuer certificate.
50003 Certificate error: Unable to get CRL (Certificate revocation list).
50004 Certificate error: Unable to decrypt certificate signature.
50005 Certificate error: Unable to decrypt CRL (Certificate revocation list) signature.
50006 Certificate error: Unable to decode issuer public key.
50007 Certificate error: Certificate signature failure.
50008 Certificate error: CRL (Certificate revocation list). signature failure.
50009 Certificate error: Certificate not yet valid;
50010 Certificate error: Certificate has expired.
50011 Certificate error: CRL not yet valid.
50012 Certificate error: CRL has expired.
50013 Certificate error: Certificate does not have 'before' field.
50014 Certificate error: Certificate does not have 'after' field.
50015 Certificate error: CRL does not have 'last update' field.
50016 Certificate error: CRL error in 'next update' field.
50017 Certificate error: Out of memory while reading certificate.
50018 Certificate error: Depth zero self signed certificate.
50019 Certificate error: Self signed certificate in chain.
50020 Certificate error: Unable to get issuer certificate locally.
50021 Certificate error: Unable to verify the first certificate.
50022 Certificate error: Certificate chain too long.
50023 Certificate error: Certificate revoked.
50024 Certificate error: Invalid Cartificate Authority.
50025 Certificate error: Path length exceeded.
50026 Certificate error: Invalid certificate purpose.
50027 Certificate error: Certificate not trusted.
50028 Certificate error: Certificate rejected.
50029 Certificate error: Subject issuer mismatch.
50030 Certificate error: Authority and subject key identifier mismatch.
50031 Certificate error: Authority and issuer serial number mismatch.
50032 Certificate error: Key usage does not include certificate signing.
50050 Certificate error: Application verification failure.



Winsock errors:
Value Description
10004 Interrupted function call. A blocking operation was interrupted by a call to WSACancelBlockingCall.
10009 Generic error for invalid format, bad format.
10013 Permission denied. An attempt was made to access a socket in a way forbidden by its access permissions. An example is using a broadcast address for "sendto" without broadcast permission being set using setsockopt (SO_BROADCAST).
10014 Bad address. The system detected an invalid pointer address in attempting to use a pointer argument of a call. This error occurs if an program passes an invalid pointer value, or if the length of the buffer is too small. For instance, if the length of an argument which is a struct sockaddr is smaller than sizeof(struct sockaddr).
10022 Invalid argument. Some invalid argument was supplied (for example, specifying an invalid level to the setsockopt function). In some instances, it also refers to the current state of the socket - for instance, calling accept on a socket that is not listening.
10024 Too many open files. Too many open sockets. Each implementation may have a maximum number of socket handles available, either globally, per process or per thread.
10025 The IP address provided is not valid or the host specified by the IP does not exist.
10038 Socket operation on a non-socket. An operation was attempted on something that is not a socket. Either the socket handle parameter did not reference a valid socket, or for select, a member of an fd_set was not valid.
10048 Address already in use. Only one usage of each socket address (protocol/IP address/port) is normally permitted. This error occurs if a program attempts to bind a socket to an IP address/port that has already been used for an existing socket, or a socket that wasn't closed properly, or one that is still in the process of closing. For server programs that need to bind multiple sockets to the same port number, consider using setsockopt(SO_REUSEADDR). Client programs usually need not call bind at all - connect will choose an unused port automatically.
10049 Cannot assign requested address. The requested address is not valid in its context. Normally results from an attempt to bind to an address that is not valid for the local machine, or connect/sendto an address or port that is not valid for a remote machine (e.g. port 0).
10050 Network is down. A socket operation encountered a dead network. This could indicate a serious failure of the network system (the protocol stack that the WinSock DLL runs over), the network interface, or the local network itself.
10051 Network is unreachable. A socket operation was attempted to an unreachable network. This usually means the local software knows no route to reach the remote host.
10052 Network dropped connection on reset. The host you were connected to crashed and rebooted. May also be returned by setsockopt if an attempt is made to set SO_KEEPALIVE on a connection that has already failed.
10053 Software caused connection abort. An established connection was aborted by the software in your host machine, possibly due to a data transmission timeout or protocol error.
10054 Connection reset by peer. An existing connection was forcibly closed by the remote host. This normally results if the peer program on the remote host is suddenly stopped, the host is rebooted, or the remote host used a "hard close" (see setsockopt for more information on the SO_LINGER option on the remote socket.)
10057 Socket is not connected. A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using sendto) no address was supplied. Any other type of operation might also return this error - for example, setsockopt setting SO_KEEPALIVE if the connection has been reset.
10058 Cannot send after socket shutdown. A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call. By calling shutdown a partial close of a socket is requested, which is a signal that sending or receiving or both has been discontinued.
10060 Connection timed out. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10061 Connection refused. No connection could be made because the target machine actively refused it. This usually results from trying to connect to a service that is inactive on the foreign host - i.e. one with no server program running.
10063 Specified host name is too long.
10064 Host is down. A socket operation failed because the destination host was down. A socket operation encountered a dead host. Networking activity on the local host has not been initiated. These conditions are more likely to be indicated by the error WSAETIMEDOUT.
10065 No route to host. A socket operation was attempted to an unreachable host. See WSAENETUNREACH
10091 Network subsystem is unavailable. This error is returned by WSAStartup if the Windows Sockets implementation cannot function at this time because the underlying system it uses to provide network services is currently unavailable.
10093 Successful WSAStartup not yet performed. Either the program has not called WSAStartup or WSAStartup failed. The program may be accessing a socket which the current active task does not own (i.e. trying to share a socket between tasks), or WSACleanup has been called too many times.
10094 Graceful shutdown in progress. Returned by recv, WSARecv to indicate the remote party has initiated a graceful shutdown sequence.
11001 Host not found. No such host is known. The name is not an official hostname or alias, or it cannot be found in the database(s) being queried. This error may also be returned for protocol and service queries, and means the specified name could not be found in the relevant database.
11002 Authoritative host not found. This is usually a temporary error during hostname resolution and means that the local server did not receive a response from an authoritative server. A retry at some time later may be successful.

Platforms

Windows