Re: wodVPN.dll and virtual adapter for 64bit OS - WeOnlyDo Discussion board

Re: wodVPN.dll and virtual adapter for 64bit OS (General questions)

by Giovanni, Wednesday, November 04, 2009, 18:54 (5497 days ago) @ Giovanni

Hi,

I've tryed to install the virtual nic released from openvpn and wippien (for 64bit installation) but the nic appears, in the network control panel, as Cable unplugged .

Analyzing the nic from .NET application, using WMI interface, the nic appears always with this two properties set to false:
IpEnabled = false
NetEnabled = false

When trying to set static IP/NetMask, the new values appear on the window panel shown from network control panel properties, but ipconfig /all not confirms this: the nic appears with no IP and it's description is similar to disconnetcted support (my OS installation is in italian)

In addition, when my application create a wodVPN instance, it's fail with error Retrieving the COM class factory for component with CLSID {459C65ED-AA9C-4CF1-9A24-7685505F919A} failed due to the following error: 80040154. seems the dll has not properly registered, but the command regsvr32 has worked fine...

Any ideas?

Thanks for any hint/help! :)


PS: Have you the intention of release an own 64bit virtual adapter driver?


Giovanni


Complete thread: